Handyman Network Vienna LogoHandwerker-Netz

Wardrobe Assembly Vienna

Rauch, Nolte, Hülsta, IKEA and all other brands - leveled on uneven floors, securely anchored.

  • Rauch, Nolte, Hülsta, Wimex and all other brands
  • Leveled and secured on uneven floors
  • Mirror doors and soft-close fittings adjusted

Over 100 successful installations in Vienna

Wardrobe Assembly Vienna
Wall scanner before every drill
Altbau, drywall, concrete: right anchor
Fixed price upfront
Fully insured
Wall scanner before every drill
Altbau, drywall, concrete: right anchor
Fixed price upfront
Fully insured
Wall scanner before every drill
Altbau, drywall, concrete: right anchor
Fixed price upfront
Fully insured
Wall scanner before every drill
Altbau, drywall, concrete: right anchor
Fixed price upfront
Fully insured
Wall scanner before every drill
Altbau, drywall, concrete: right anchor
Fixed price upfront
Fully insured
Wall scanner before every drill
Altbau, drywall, concrete: right anchor
Fixed price upfront
Fully insured

How It Works

1

Send a photo

Photo of the boxes or product link. Note on wall type if wall anchoring is needed. Fixed price usually within an hour.

2

Assembly

Floor measured, wardrobe leveled, fittings calibrated, wall anchoring placed.

3

Done

All doors and drawers checked, packaging taken away.

Pricing Overview

Indicative prices. Fixed price confirmed before work starts.

ServicePrice
Standard wardrobe (2–3 doors)from €79
Large wardrobe with interior fittingsfrom €109
Walk-in wardrobe systemon request
Wall anchoringincluded
Floor compensation with furniture shimsincluded

Discuss a project or request a fixed price.

A photo is enough. Quote usually within an hour.

What's included

  • Laser leveling on uneven floors - including wardrobes without adjustable feet.
  • Mirror doors with correct hinge adjustment - no re-tightening later.
  • Soft-close fittings calibrated during assembly.
  • Wall anchoring with scanner - right rawlplug for Altbau and Rigips.

Wardrobes look straight after assembly. The problems appear later: doors that don't close properly, drawers that bind, or a wardrobe that leans slightly against the wall after a few months. The cause is almost always the assembly - either the floor wasn't compensated adequately or the wardrobe wasn't anchored.

In Vienna's Altbau apartments, floors often deviate 1 to 3 centimetres. Wardrobes without adjustable feet - which describes many brands outside the IKEA range - can't simply be placed down. We compensate for floor deviations with furniture shims before the wardrobe is set, then anchor it to the wall.

Which brands we assemble

All common wardrobe systems: Rauch, Nolte, Hülsta, Wimex, Wellemöbel, Forte, Bega and all other flatpack manufacturers. Plus IKEA PAX in all configurations. For premium brand furniture from specialist retailers (like Hülsta or Nolte), pieces often arrive partially assembled as individual modules - we connect them and align everything.

Mirror door wardrobes are a frequent special case: mirror doors are heavier than standard fronts. Hinges designed for the weight of standard chipboard don't hold reliably long-term. We check the fittings and set them so doors still hang cleanly after years of use.

Soft-close and other fittings

Soft-close hinges and push-to-open fittings only work reliably if set correctly during assembly. Most manufacturers supply these fittings pre-adjusted to a middle setting. That setting rarely suits the actual door thickness and weight. We calibrate all fittings after installation.

Wardrobes without adjustable feet on Altbau floors

IKEA PAX has adjustable feet that compensate for floor deviations of up to 2 cm. Many other brands don't. With a Rauch or Nolte wardrobe, the carcass sits directly on the floor. If the floor is uneven, the wardrobe stands crooked - and pulls further over time. Doors no longer close flush, drawers no longer run cleanly.

The solution is shimming before assembly, not after. Shimming under an already-assembled wardrobe is possible but less precise. We measure the floor deviation first and set the shims before the wardrobe is placed.

For wardrobes without adjustable feet, always measure the floor deviation at the exact planned position - not somewhere else in the room. Altbau floors often vary significantly over short distances.

FAQs

  • Which brands do you assemble in Vienna?

    All flatpack wardrobe systems: Rauch, Nolte, Hülsta, Wimex, Wellemöbel, Forte, IKEA PAX and all others. For premium brand furniture, please mention how the pieces are delivered.

  • How much does wardrobe assembly cost in Vienna?

    Standard wardrobe (2–3 doors) from €79. Large wardrobe with interior fittings (drawers, pull-outs, mirror) from €109. Fixed price confirmed after a photo or product link.

  • Can you assemble wardrobes without adjustable feet on uneven floors?

    Yes. We compensate for floor deviations with furniture shims and anchor the wardrobe to the wall. Even wardrobes without built-in feet stand straight afterwards.

Service Area

We assemble wardrobes across all of Vienna and surrounding areas. Frequently in Neubau (1070), Josefstadt (1080), Alsergrund (1090) and Margareten (1050), as well as all other districts and surrounding areas including Klosterneuburg, Mödling and Schwechat.

1070 Neubau1080 Josefstadt1090 Alsergrund1050 Margareten1220 Donaustadt1210 Floridsdorf

Ready for a quote?

A photo is enough. Fixed-price quote usually within an hour.

Related Services

More services in the same category

Built-in Kitchen Assembly Vienna

Built-in Kitchen Assembly Vienna

Nobilia, Häcker and all brands - cabinets leveled, worktop sealed, fixed price from kitchen plan.

Furniture Disassembly Vienna

Furniture Disassembly Vienna

Furniture dismantled for transport and reassembled at new location - all parts labelled, no missing components. Fixed price upfront.

Hallway Furniture Assembly Vienna

Hallway Furniture Assembly Vienna

Hallway furniture freestanding or wall-mounted - mounted correctly, scanner before every drill, no minimum job. Fixed price from €49.

IKEA Bed Assembly Vienna

IKEA Bed Assembly Vienna

MALM, HEMNES and all IKEA beds - slat base tensioned correctly, drawers flush, no squeaking. Fixed price from €69.

IKEA BESTÅ Assembly Vienna

IKEA BESTÅ Assembly Vienna

BESTÅ freestanding or wall-hung - push-to-open set correctly, wall mounting with the right anchor. Fixed price from €69.

IKEA KALLAX Assembly Vienna

IKEA KALLAX Assembly Vienna

KALLAX 1×4 to 4×4 - back panel fitted flat, squares even, wall anchoring included. Fixed price from €59.

IKEA METOD Kitchen Assembly Vienna

IKEA METOD Kitchen Assembly Vienna

IKEA METOD fully assembled - cabinets leveled, worktop sealed, doors flush. Fixed price from kitchen plan.

IKEA PAX Assembly

IKEA PAX Assembly

PAX, KALLAX, BESTÅ, BILLY - assembled with laser alignment so doors sit flush, even on uneven Altbau floors. Fixed price, wall-anchored, packaging removed.

Loft Bed Assembly Vienna

Loft Bed Assembly Vienna

Loft beds assembled safely - all joints checked, safety rails to EN 747, wall anchoring as standard. Fixed price from €89.

Office Furniture Assembly Vienna

Office Furniture Assembly Vienna

Office furniture for home offices and businesses - height-adjustable desks, filing cabinets, cable management. Fixed price upfront, invoice on company name.

Sliding Door Wardrobe Assembly Vienna

Sliding Door Wardrobe Assembly Vienna

Sliding door systems laser-aligned - tracks parallel, doors running smoothly, suitable for Altbau. Fixed price from €99.