Wardrobe Assembly Vienna
- Rauch, Nolte, Hülsta, Wimex and all other brands
- Leveled and secured on uneven floors
- Mirror doors and soft-close fittings adjusted
Nick replies personally, usually within the hour.
- 5.0 on Googlefrom 25 reviews
- Price clear upfrontno surprises on the invoice
- All of Viennaall 23 districts plus 50 km around
- Fast replyusually within the hour
What's included
- Laser leveling on uneven floorswardrobes without adjustable feet stand straight.
- Mirror doors set with correct hinge adjustment so they hang cleanly for years.
- Soft-close fittings calibrated during assembly, not left on the factory default setting.
- Wall anchoring with a stud scannercorrect rawlplug for Altbau masonry and plasterboard.
Pricing Overview
Indicative prices. Fixed price confirmed before work starts.
- Standard wardrobe (2-3 doors)from €79
- Large wardrobe with interior fittingsfrom €109
- Walk-in wardrobe systemon request
- Wall anchoringincluded
- Floor compensation with furniture shimsincluded
- Sliding door wardrobe (2-track)from €119
Your exact price, before we start
Tell us briefly about the job, with a model name or photo if you like. Fixed price (recommended) or hourly rate, your choice.
Prefer hourly? €60 for the first hour (incl. travel), €50 for each additional hour.
Minimum order value: €60 per visitDetails in the terms
How It Works
- 1
Send your enquiry
Product link, model name or a photo of the boxes. Note on wall type if wall anchoring is needed. Fixed price usually within an hour.
- 2
Assembly
Floor measured, wardrobe leveled, fittings calibrated, wall anchoring placed.
- 3
Done
All doors and drawers checked, packaging taken away.
Wardrobes look straight after assembly. The problems appear later: doors that don't close properly, drawers that bind, or a wardrobe that leans slightly against the wall after a few months. The cause is almost always the assembly, either the floor was not compensated adequately or the wardrobe was not anchored.
In Vienna's Altbau apartments, floors often deviate 1 to 3 centimetres. Wardrobes without adjustable feet (which describes many brands outside the IKEA range) cannot simply be placed down. We compensate for floor deviations with furniture shims before the wardrobe is set, then anchor it to the wall.
Which brands we assemble
All common wardrobe systems: Rauch, Nolte, Hülsta, Wimex, Wellemöbel, Forte, Bega and all other flatpack manufacturers. Plus IKEA PAX in all configurations. For premium brand furniture from specialist retailers (like Hülsta or Nolte), pieces often arrive partially assembled as individual modules. We connect them and align everything.
Mirror door wardrobes are a frequent special case: mirror doors are heavier than standard fronts. Hinges designed for the weight of standard chipboard do not hold reliably long-term. We check the fittings and set them so doors still hang cleanly after years of use.
Soft-close and other fittings
Soft-close hinges and push-to-open fittings only work reliably if set correctly during assembly. Most manufacturers supply these fittings pre-adjusted to a middle setting. That setting rarely suits the actual door thickness and weight. We calibrate all fittings after installation.
Sliding Door Wardrobe Assembly Vienna
The biggest challenge with sliding door wardrobes is keeping the top and bottom tracks parallel. If the two rails deviate by even a few millimetres, doors run stiffly or jump out of the channel when opened. In Altbau apartments with dropped or uneven ceilings, this is hard to achieve accurately without a laser level.
We align both tracks with the laser, adjust the soft-close setting after the doors are hung, and check the movement of every door. This applies to all systems: IKEA PAX PAXHOLM and AULI, Hettich, Häfele and all other sliding door systems.
Wardrobes without adjustable feet on Altbau floors
IKEA PAX has adjustable feet that compensate for floor deviations of up to 2 cm. Many other brands do not. With a Rauch or Nolte wardrobe, the carcass sits directly on the floor. If the floor is uneven, the wardrobe stands crooked and pulls further over time. Doors no longer close flush, drawers no longer run cleanly.
The solution is shimming before assembly, not after. Shimming under an already-assembled wardrobe is possible but less precise. We measure the floor deviation first and set the shims before the wardrobe is placed.
For wardrobes without adjustable feet, always measure the floor deviation at the exact planned position, not somewhere else in the room. Altbau floors often vary significantly over short distances.
FAQs
Which brands do you assemble in Vienna?
All flatpack wardrobe systems: Rauch, Nolte, Hülsta, Wimex, Wellemöbel, Forte, IKEA PAX and all others. For premium brand furniture, please mention how the pieces are delivered.
How much does wardrobe assembly cost in Vienna?
Price depends on the job. Fixed price confirmed after a photo or product link.
Can you assemble wardrobes without adjustable feet on uneven floors?
Yes. We compensate for floor deviations with furniture shims and anchor the wardrobe to the wall. Even wardrobes without built-in feet stand straight afterwards.
Can you also assemble sliding door wardrobes?
Yes. All sliding door systems: IKEA PAX PAXHOLM and AULI, Hettich, Häfele and all others. Top and bottom tracks are laser-aligned, soft-close adjusted after the doors are hung.
Service Area
We assemble wardrobes across Vienna. Wardrobe jobs are particularly common in Altbau apartments in Neubau (1070), Josefstadt (1080), and Alsergrund (1090), where uneven floors and high ceilings require careful leveling, as well as in newer residential buildings in Donaustadt (1220) and Floridsdorf (1210).
- 1070 Neubau
- 1080 Josefstadt
- 1090 Alsergrund
- 1050 Margareten
- 1220 Donaustadt
- 1210 Floridsdorf
More services
Tell us what needs doing.
Furniture, kitchen, walls or a list of small jobs: a short message is enough, we'll sort out the rest.