IKEA Assembly Vienna
- PAX, KALLAX and BESTÅ wardrobes
- IKEA Bed Systems (MALM, HEMNES, FJELLSE)
- BRIMNES, STUVA and other IKEA furniture
Over 100 successful installations in Vienna
What's included
- Laser leveling on uneven Altbau floors: doors and drawers stay smooth for years after assembly.
- Diagonal measurement on PAX before the back panel is fixed: no twisted frame, no sticking doors.
- BESTÅ doors and push-to-open fittings individually adjusted after assembly: factory settings rarely match the actual door thickness.
- Wall anchoring with a stud scanner: correct fixings for Altbau brick and drywall, wardrobe stays secure under full load.
Pricing Overview
Indicative prices. Fixed price confirmed before work starts.
| Service | Price |
|---|---|
| IKEA PAX wardrobe | from €79 |
| IKEA KALLAX | from €49 |
| IKEA BESTÅ | from €69 |
| IKEA Bed System (MALM, HEMNES) | from €59 |
| IKEA Loft bed (KURA, STUVA, VITVAL) | from €89 |
| Wall anchoring | included |
Discuss a project or book an appointment.
A photo is enough. Quote usually within an hour.
How It Works
Send a photo
Photo of the boxes or product link. Fixed price usually within an hour.
Assembly
Floor measured, furniture leveled, fittings adjusted, wall anchoring placed.
Done
Doors and drawers checked, packaging taken away, left clean.
We assemble all IKEA furniture in Vienna: from a single KALLAX shelf to a PAX wardrobe system with interior fittings and sliding doors. The difference from DIY assembly usually comes down to the details: compensating for floor deviations, measuring diagonals, adjusting fittings correctly. In Vienna's Altbau apartments, these steps matter.
Altbau floors often deviate 1 to 3 centimetres. PAX has adjustable feet, but they need to be set correctly. For KALLAX and BESTÅ, we use furniture shims. Every wardrobe is then anchored to the wall, regardless of how fully it is loaded.
PAX, KALLAX and BESTÅ: what matters for each model
With PAX, the thin back panel is the structural backbone. We measure both diagonals before fixing it. With BESTÅ, every door and push-to-open fitting is adjusted after assembly, as factory settings rarely suit the actual door thickness. With KALLAX, correct alignment of the back panel ensures all compartments sit flush.
PAX sliding doors (PAXHOLM, AULI) require precisely parallel tracks. The top and bottom rails must be laser-aligned on Altbau ceilings and uneven floors, otherwise doors run stiffly or jump out of the track.
IKEA bed systems
We assemble MALM, HEMNES and FJELLSE beds completely, including slat holders and underbed drawers. For loft beds (KURA, STUVA), we check all safety connections after assembly. BRIMNES and HEMNES combinations with headboards and storage panels are no problem either.
FAQs
How much does IKEA assembly cost in Vienna?▾
PAX from €79, KALLAX from €49, BESTÅ from €69, bed system from €59. Fixed price confirmed after a photo or product link, no hourly billing.
Which IKEA models do you assemble?▾
All of them. PAX, KALLAX, BESTÅ, BRIMNES, MALM, HEMNES, FJELLSE, KURA, STUVA, TROFAST and all other IKEA products. Including combined configurations with add-ons and interior fittings.
Can you assemble IKEA furniture on uneven floors?▾
Yes. We measure the floor deviation first and compensate with furniture shims or adjustable feet before the wardrobe is assembled. In Vienna's Altbau apartments, deviations of 1 to 3 centimetres are normal.
How long does IKEA assembly take?▾
PAX 2-door: 90 to 120 minutes. KALLAX 4x4: around 90 minutes. BESTÅ combination: 60 to 90 minutes. Loft bed systems: 90 to 150 minutes depending on the model. We always include a time estimate with the quote.
Service Area
We assemble IKEA furniture across Vienna, with frequent bookings in residential districts popular with renters moving into new apartments: Neubau (1070), Josefstadt (1080), Alsergrund (1090) and Margareten (1050). We also cover Donaustadt, Floridsdorf and surrounding towns including Klosterneuburg and Mödling.
Discuss a project or book an appointment.
A photo is enough. Quote usually within an hour.